START YOUR BROADCAST

Want to start a broadcast? Check the Streaming Guide first.

1 Select the channel you want to Go LIVE ON AIR:

2 Verify your Autorecord settings on the selected channel:

Note: Please make sure you have enough storage in your account. We also recommend to ALWAYS locally record your Live ON AIR Broadcast.

VIDEO

ONOFF

RECORD IS

3 To go LIVE ON AIR, we recommend using the following broadcaster apps:

OBS: Open Broadcaster Software

Free Broadcaster for Mac & PCs

Download

Larix Broadcaster

Free Broadcaster for iOS & Android Phones

4 Restream a 3rd Party Live Feed

Important: External streams that can be ingested by TikiLIVE channels can be only RTMP, RTMPE and RTSP addresses.

vMix

3rd Party Media Broadcasting

Download

Wirecast

3rd Party Media Broadcasting

Download

XSplit

3rd Party Media Broadcasting

Download

VidBlasterX

3rd Party Media Broadcasting

Download

Streamstar SW

3rd Party Media Broadcasting

Download

TriCaster

3rd Party Media Broadcasting

Download

Teradek VidiU

3rd Party Media Broadcasting

Ace Live Streaming & PC Mirroring

Android Mobile Broadcasting

NOTE: Append may cause issues on content playback, and should only be utilized after your controlled streaming environment has been tested with append enabled

Check to apply settings to all channels

Config File (XML format):

Download

Larix Broadcaster allows to encode and broadcast video and/or audio live content from your mobile device in real-time over WiFi, EDGE, 3G or LTE.
- Live H.264/AAC encoding.
- Allows using RTSP and RTMP streaming protocols.

Requires iOS 8.0 or later. Compatible with iPhone, iPad, and iPod touch.

Requires Android 4.1 and up.

Open Broadcaster Software (OBS) is a free and open-source software suite for recording and live streaming. There are versions for Windows, macOS and Linux distributions, such as Ubuntu.

Transmission of data is primarily done via the Real Time Messaging Protocol (RTMP) and can be sent to any RTMP supporting destination.

For video encoding, OBS is capable of using the x264 free software library,[7] Intel Quick Sync Video, Nvidia NVENC and the AMD Video Coding Engine to encode video streams into the H.264 format. Audio can be encoded using AAC codecs.

System Requirements
The minimum requirements to use OBS Studio on Windows are:

OS: Windows 7 or above
Processor: Intel i5 recommended (can also run on dual-core and quad-core) Or AMD FX series
Ram: 4GB recommended

At least 2.3 GHz 32- or 64-bit processor,
1 GB RAM
QuickTime 7.5
200 MB HD (for install)
HD space for recording to disk
32 MB PCI-Express graphics card with 3D acceleration (GeForce or Radeon class card)
Microsoft^® DirectX 9.0c
GeForce 5200, Radeon 9600 or better for Chroma Key
Sufficient upload speed (300kbps for low quality, 700kbps for good, 1.3 mb and up for HD)

Intel Core Duo or dual G5 is required for HDV decoding
Minimum 512 MB RAM
QuickTime 7 or higher
200 MB HD (for install)
HD space for recording to disk
A Quartz Extreme capable graphics card
Sufficient upload speed (300kbps for low quality, 700kbps for good, 1.3 mb and up for HD)

VidBlasterX is a native 64 bit program and requires a 64 bit version of Windows 7 or higher.
To get the best performance from VidBlasterX a lot of factors need to be considered, but probably the most important factor is the CPU. VidBlasterX makes extensive use of multi-threading, and as a result has great multi core performance. So besides clock frequency, the number of cores is important as well. VidBlasterX is able to do an even load distribution on a 6 core (12 virtual cores) i7-5820K CPU ingesting 8 HD streams.

Mac OS X 10.5 or later
Intel Core Duo or dual G5 is required for HDV decoding
Minimum 512 MB RAM
QuickTime 7 or higher
200 MB HD (for install)
HD space for recording to disk
A Quartz Extreme capable graphics card
Sufficient upload speed (300kbps for low quality, 700kbps for good, 1.3 mb and up for HD)

Intel Core i7 5820K CPU or similar 6-core processor (for up to 720p@50/60 fps streaming) or Intel Core i7 5960X CPU (for up to 1080p@25/30 streaming)
16GB (4 x 4GB quad channel) DDR4, 2133 MHz RAM
Windows 7 Professional 64Bit OS
128GB or higher SATA SSD – primary drive
500GB or higher 7200RPM 64MB cache SATA HDD – secondary drive
Video Card: EVGA , PNY or other brands GPU – GTX960 2GB Memory GDDR5 PCI Express x16 3.0
FULL HD Monitor with 1920*1080 resolution

Software:
Windows 7 SP1, Windows 8
.NET Framework 3.5
DirectX 10.1 or better
Internet Explorer 9.0
Adobe Flash Player for IE

Hardware:
For HD 720p Recording/Streaming:
Processor: 2nd Generation Core i5 or equivalent
Graphics Card: GeForce/Radeon Class (DirectX 10.1 or better), Intel HD4000

Software:
Windows 7 or higher

Hardware, at least:
2Ghz Dual-Core Processor
1GB DDR2
7200 RPM Hard Drive (for recordings)
DirectX 10 Compatible Graphics Card

Preferred: Windows 7, 8.1, 10 64 Bit

Hardware:
At least 4GB 1600 Mhz memory or faster.
One channel system SD, at least Intel i3 3 Ghz processor.
Two channel system SD, at least Intel i5 3 Ghz processor.
Four channel system SD, at least Intel i7 3 Ghz processor.
Per channel is at least 1GB free memory needed.
More hints and preferred configurations here.

Information:
Camera Stream: Stream places, events, or just casual IRL.

Designed for efficiency, the app allows you to stream much longer without having to deal with recharging!

Front and back camera support, different sizes and Full Screen mode.
Audio from microphone*.
Web Source overlays and Image overlays.
Mute video/audio while live.
Draw on screen while screen streaming.
Invisible Hot Corner for stream controls (aka magic button).
Clean, simple design with no bloatware.

Datavideo NVS-20 is a broadcast quality HD/SD H.264 network streaming server, designed for live event streaming in real-time at up-to 6Mb/s. The NVS-20 can stream to TikiLIVE through a Wowza server.
NVS-20 is an ideal partner for Windows or Apple-based servers. NVS-20 is an easy-to-use device for HD / SD video streaming over local or global IP networks.
The unit is remotely controlled using any computer or mobile device with a web browser.

The Teradek VidiU gives you the freedom to broadcast live high definition video directly to the Web without a PC.
VidiU's generic RTMP interface allows you to stream your live video content to TikiLIVE.
VidiU offers a free application for iOS and Android that allows you to monitor your live broadcast in real time.
Video input: HDMI.
Supported input resolutions when Widescreen is set to Yes (16:9):
1080i 50/59.94/60
1080p 23.98/24/25/30
720p 23.98/24/50/59.94/60
576i/p
480i/p
Video Codec:
Compression: Base/Main H.264
Bit Rate: 250 Kbps to 5 Mbps
Network:
Ethernet: 10/100BASE-T
WiFi: Dual Band MIMO 802.11 a/b/g/n
USB 3G/4G modem support

Recommended OS:
Windows 7(SP1) certified PC or workstation. Or Windows 2008 (SP2) with Windows Media Service(Desktop Experience) certified server with sufficient space to install the selected Blackmagic Design Decklink or Intensity IO card.
Hardware Requirements for SD / HD Operations:

Intel Quad Core Xeon or Core i7
16 GB RAM, 500 GB(Minimum 7200 RPM) or Better SATA or SAS HDD for System Drive and SATA or SAS HDD or NAS with Gigabit LAN for Data Storages ,
1 GB Nvidia GTX Series 560 or Higher Graphic Card, DVD Writer,
3 PCI Express Slot for Graphic Card(x16 Slot) 2 Extra PCI Express Slots free for 2 Decklink/Intensity Pro Card for Input / Output.
Blackmagic-Design’s Decklink / Intensity Card for Input/ Output (Analog , SDI , HD & HD-SDI)

Now you can be the director, producer, and star of your own live show with Teradek’s new Live:Air Solo. Uniquely designed for the iPhone, Live:Air Solo is packed with real-time creative tools such as graphics, overlays, transitions, and support for all of the popular live streaming destinations. Share your adventures and events using the new Live:Air Solo. Streaming at your fingertips.
Live Streaming On the Go
Your phone is always with you and so is Live:Air Solo. Simply launch the app, frame your shot, and go live using your device’s 3G/4G/LTE connection for a full HD stream.

Requires iOS 8.0 or later. Compatible with iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone SE

Intel^Â® Pentium^Â® III 500MHz or faster processor (or equivalent), 128MB of RAM, 15MB Hard Disk Space & 16bit Sound Card

Intel^® Pentium^® 4 or AMD Athlon XP, 1024x768 resolution, DirectX compatible soundcard, 512MB RAM & 50MB free on the hard drive.

Intel^® Core 2 or AMD Athlon X2, 1280x1024 resolution (or higher), Multi-channel DirectX compatible soundcard, 1024MB RAM & 200MB free on the hard drive.

Microsoft^® Windows 7 or newer

Microsoft^® Windows 7 Professional 32-bit

Intel^® processor, 1024x768 resolution, CoreAudio compatible soundcard, 1024MB RAM & 50MB free on the hard drive.

Intel^® processor, 1440x900 resolution, Multi-channel CoreAudio compatible soundcard, 2048MB (2Gb) RAM & 200MB free on the hard drive.

Mac OS X v10.5 Leopard on Intel processor platform

Mac OS X v10.6.x Snow Leopard on Intel processor platform

Windows Vista, Windows 7, Windows 8^®

CPU: 1GHz or faster processor
Memory: 1GB of RAM
Disk space: 100 MB
Sound card: Optional

Windows Mac OS X Linux

2GHz or faster CPU, at least 1GB of RAM & a soundcard with 2 stereo audio outputs

Linux (installation and web browser control)

Windows (web browser control)

Mac OS X (web browser control)

Airtime is open source radio automation software (GPL v3) for GNU/Linux platforms, but once installed can be controlled from anywhere using a modern browser. We recommend installing on Ubuntu Linux 12.04 LTS or Debian Wheezy on a computer with at least a 1 GHz processor and 512 MB of RAM for a Server Edition OS or 1GB of RAM for a Desktop Edition OS.

START YOUR BROADCAST

1 Select the channel you want to Go LIVE ON AIR:

2 Verify your Autorecord settings on the selected channel:

3 To go LIVE ON AIR, we recommend using the following broadcaster apps:

OBS: Open Broadcaster Software

Larix Broadcaster

4 Restream a 3rd Party Live Feed

vMix

Wirecast

XSplit

VidBlasterX

Streamstar SW

TriCaster

Teradek VidiU

Ace Live Streaming & PC Mirroring

2 Use one of these applications to Broadcast:

Winamp DJ

Virtual DJ

SAM broadcaster

Mixxx broadcaster

Airtime broadcaster

START YOUR BROADCAST

1 Select the channel you want to Go LIVE ON AIR:

2 Verify your Autorecord settings on the selected channel:

3 To go LIVE ON AIR, we recommend using the following broadcaster apps:

OBS: Open Broadcaster Software

Larix Broadcaster

4 Restream a 3rd Party Live Feed

vMix

Wirecast

XSplit

VidBlasterX

Streamstar SW

TriCaster

Teradek VidiU

Ace Live Streaming & PC Mirroring

2 Use one of these applications to Broadcast:

Winamp DJ

Virtual DJ

SAM broadcaster

Mixxx broadcaster

Airtime broadcaster

Recording Settings

Broadcasting Settings

System and Hardware Requirements

System and Hardware Requirements

System and Hardware Requirements

Download Instructions

System and Hardware Requirements

System and Hardware Requirements

System and Hardware Requirements

System and Hardware Requirements

System and Hardware Requirements

System and Hardware Requirements

System and Hardware Requirements

System and Hardware Requirements

System and Hardware Requirements

System and Hardware Requirements

System and Hardware Requirements

System and Hardware Requirements

Broadcasting Settings

PC System Requirements

System and Hardware Requirements

Mac System Requirements

System and Hardware Requirements

Broadcasting Settings

System and Hardware Requirements

Broadcasting Settings

System and Hardware Requirements

Broadcasting Settings

System and Hardware Requirements

Broadcasting Settings

Log In or Register

Upgrade your account

Create your first channel

Upgrade your account